Proteger

TrueSafe commercial gas leak detector issuitable for hotels, restaurants, pantries etc.Safety of commercial & industrial kitchens is of prime importance.It detects LPG gas leakage & warns before the gas density in air reaches to unwanted levels.This model also provides bar-graph indicationwhich indicates level of gas leakage.Four levels of LEL are provided: 2.5%, 5.0%, 7.5% & 10.0%
Application:

• Commercial kitchens
• Pantry, cafes
• Bakery

USPs:

• Make in India product
• Dustproof & water splashproof-IP65 enclosure
• CE certifications

Product Features:

• Dustproof & water splashproof-IP65 enclosure
• Replaceable filter
• Only commercial detector available with LEL bar graph
• Pulse output for external gas valve
• Microprocessor based design for accurate & quick detection
• PFC for remote signalling & control
• Long life, simple installation & maintenance

TrueSafe LPG Gas Leak Detector, this is a portable gas leak detector for detecting LPG gas leakage at Home. The output of the detector drives the control valve. Control valve is fitted in the gas line. Once the gas leakage is detected by detector valve cuts off the gas supply in less than 1Sec by shutting off the valve. The valve can be reset or opened only manually. This is provides additional safety and allows manual inspection before resuming the gas Supply.

Product Features:

• Kitchen platform panel mountable
• Automatic calibration at the desired level of LEL (Usually 10% of LEL)
• In addition it can detect heat
• Can be interfaced with Gas Detection Panel through PFC relay output.
• TrueSafe residential gas leak detector is suitable
• for home, bungalows.
• Safety of residential kitchens is of prime
• importance.
• It detects LPG/PNG gas leakage & warns before
• the gas density in air reaches to unwanted levels.
• wall mounted unit is compact and designed for
• low cost domestic applications
• Application
• Residential kitchens
• Bungalows
• USPs:
• Make in India product
• Gas + Heat detection
• CE certified
• Unique patent design
• Auto resettable
• Product Features:
• LPG detector detects when LPG concentration exceeds about 10 %-15 % of LEL
• TrueSafe detector has unique patented enclosure design
• Microprocessor based design for accurate & quick detection
• PFC for remote signalling & control
• Long life, simple installation & maintena

TS230HLBW (Wireless TrueSafe Gas leak detector) is de-signed for detection and early warning for LPG or CNG gas leakage from cylinders or through pipelines. It is operated on 230VAC mains. This wall mounted unit is compact and designed for low cost domestic applications as well as commercial applications like hotel kitchens.

Product Features:

• Detects gases like LPG, CNG, Natural gas
• Kitchen platform panel mountable
• Automatic calibration at the desired level of LEL (Usually 10% of LEL)
• Heat detection
• Wireless range up to 100m
• Generates Keep Alive message

Application:
• Hotel
• Pantries / Canteen
• Home USPs
• Gas + Heat detection
• Make In India Product
• CE certified
• Wireless range up to 100 meter
• Low power consumption

Model TrueSafe TS21I-EC gas detector is suitable to detect Ammonia, Carbon Monoxide, Chlorine, Chlorine Dioxide, Ethylene Oxide, Hydrogen, Hydrogen Chloride, Hydrogen Sulphide, Nitric Oxide, Nitrogen Dioxide, Sulphur Dioxide, Volatile Organics as well as Oxygen gases. Application area of this detector is in Refineries and Petrochemical Plants, Oil and Gas, LPG station, Chemical and Pharma Industries, Fertilizer and Power plants, Gas Boiler, and Spray-Paints etc where gas leakage is possible. It reads the gas concentration in Air and transmits to a detection panel over digital bus as well as it shows LEL level on display. Electrochemical type of gas sensor is used in this detector. This sensor provides good

reproducibility, good performance against changes in atmospheric

temperature and humidity. It has long life-span and easy operation.  Detector has provision to set Two alarm levels of warnings (High & Low). Relay output is provided and this output can be connected to the conventional Gas Detection Panel OR SCADA system. For BMS connectivity detector has provided RS485 output. Additionally 4-20mA and Selectable 0-5 V & 0-10V Analog output could be also available. Enclosure used is suitable for Zone 1 & Zone 2 hazardous areas.

Application:

•  OIL & GAS refinery Industries
•  Fertilizer and Power plants
•  Automotive and Petrochemical Plants
•  Chemical & Pharma Industry
•  Steel & copper industries
•  LPG bottling & LNG Terminals

Salient Features:

•  Calibration required as per OISD / Safety Standards.
•  Simulate alarm, fault and warning.
•  Replaceable Sensor Provision.
•  View gas reading, configuration and diagnostic.
•  Wide Operating Temperature Range.
•  Immune to Catalytic Poisons.
•  Failsafe Operation.